Eagle Pressurized Flush Mount HUD Kit

KIT FEATURES

The Eagle Flush Mount HUD pressurized AOA kit was designed and comes complete with most parts to mount the AOA sense probe, connection hoses and AOA sensor module outside of the pressure bulkhead. The AOA sensor connects through to the inside cockpit through unused pins on an existing pass-through connector. Connections on the inside of the aircraft connect the signals to the display interface module for power, audio, and display connections. Our systems are designed for simple installation and pilot flown calibration for real time, instantaneous full-scale AOA range.

The Eagle display is a highly visible, full color, chevron style display. With the chevron display, when you come in for a landing you want to fly to the blue donut (on speed for landing). Should you come in with too low of an angle of attack, the yellow chevron will light up and tell you to put your nose up. Should you come in with too high of an angle of attack, the red chevron will light up and tell you nose down.

The flush mount HUD is for pilots that want a lower profile HUD on top of their glare-shield. The switch panel must be mounted in the instrument panel. Intended for placement directly in front of the pilot. Allows for instantaneous viewing of AOA information exactly where needed. The Flush Mount HUD kit sits on top of the Eagle display, showing the display segments in the HUD glass.

• Instantaneous Angle of Attack indication.
• Additional indication segments.
• Three point calibration process, programmed on remote switch panel, to aircraft specific lift curve.
• 16 different LED brightness levels from ultra dim to very bright.
• Display has an imbedded photocell for daytime/nighttime brightness settings, choice of which is programmed at the display.
• Audio output, tied to existing audio input on audio panel by others.
• 4 different audio options to choose from which is programmed by the end user at the remote switch panel.
• Audio mute switch with amber LED indicator located on remote switch panel.
• 12-28 VDC input draws less than 0.250 Amps at full brightness.

HUD FEATURES

The HUD is a self contained adjustable beam splitter adapter that mounts to the lip of the Eagle display and turns the Alpha System AOA into a true HUD. Intended for placement directly within the pilot's peripheral vision. Allows for instantaneous viewing of AOA information exactly where needed. The HUD glass is an enhanced color correcting, anti-glare lens. Comes complete with mounting frame, bezel, display brackets and hardware.

• Frame Dimensions: L: 4 1/8", W: 1.250"
• Bezel Dimensions: L: 4" x W: 2.5"

HUD COMPONENTS

• Mounting Frame.
• Dash Bezel.
• Tinted Lens.
• Custom Display Brackets.
• Hardware.
• HUD Cover with Flag.

Eagle Pressurized Kit with HUD Part #: DSTR-AOA-9600PK-(HUD)

KIT COMPONENTS

ADAPTER KITS / ADD ONS

• I/O Module Enhancement (Flaps)
• Heated Probes12V / 24V

TECHNICAL SPECIFICATIONS

PHOTOS AND Diagrams

×

1 / 35

2 / 35

3 / 35

4 / 35

5 / 35

6 / 35

7 / 35

8 / 35

9 / 35

10 / 35

11 / 35

12 / 35

13 / 35

14 / 35

15 / 35

16 / 35

17 / 35

18 / 35

19 / 35

20 / 35

21 / 35

22 / 35

23 / 35

24 / 35

25 / 35

26 / 35

27 / 35

28 / 35

29 / 35

30 / 35

31 / 35

32 / 35

33 / 35

34 / 35

35 / 35

❮ ❯

Videos

G36 Bonanza Flying AOA	Slow Flight Emergency Landing	Eagle Display Transitions