Products > Kits>Falcon Dual Kit
The Dual Falcon kit has two vertical light bar style displays. With the vertical light bar display, when you come in for a landing you want to fly to the blue LED (on speed for landing). Should you come in with too low of an angle of attack, the display will illuminate into the yellow, telling you to put your nose up. Should you come in with too high of an angle of attack, the display will illuminate red, telling you to put your nose down.
Standard Kit Part #: DSTR-AOA-9200KDUAL
|
|
|
Complete Kit Weight | Less than 3.00 lbs. Click here for full list. | |
Vertical Fixed Mount Weight | Approximately .12 LBs | 2 oz | |
Vertical Swivel Mount Weight | Approximately .195 LBs | 3.1 oz | |
AOA Interface Module size | In Inches: 5.75 x 2.60 x 1.65 | |
System Voltage Requirements | 12 - 28 Volts DC | |
System Max Power Draw | 0.250 Amps | |
System Power Cable | 6 ft, three wires: power, ground and shield | |
Heated Probe Voltage Requirements | 12 or 24 VDC (must specify when ordering) | |
Heated Probe Power Draw | 86 Watts at 12VDC / 172 Watts at 24VDC | |
Heated Probe Current Draw | 8 Amps at 12VDC and 8 Amps at 24VDC | |
Heated Probe Power Wire | Supplied by others | |
Audio Output | 1 Volt P-P max at 300 ohm input impedance | |
Aux (Audio) Cable | 6 ft, three wires: AP audio, AP ground and shield | |
Audio Options | Four | |
Mute Switch | Yes, on switch panel. | |
LED Brightness Levels | 16, from ultra dim to very bright | |
Photocell Diode | On display, allows for custom daytime/nighttime brightness settings | |
Pressurized Version | No. Pressurized version available here. |
Dual Connection Diagram | Download |
Display Dimensions | Download |
Increasing AOA Diagram | Download |
Display Segment Transitions | Download |
Power Cable | Download |
Switch Panel Cable | Download |
IF Module Extension Cable | Download |
IF Module AUX Cable | Download |
Dual IF Module Cable | Download |